Electronic Scales ACS-32: User Guide and Troubleshooting
Welcome! In this article, we will take a closer look at the ACS-32 electronic scales, which can weigh up to 35 kg with an accuracy of 5 grams. These scales are equipped with a convenient LCD display with green backlight and a tare function. They are reliable in operation at temperatures from -10°C to +40°C, and their platform is made of stainless steel for durability and easy maintenance. To save energy, the scales automatically switch to sleep mode when not in use. A calibration mode is also available for professionals, accessible from the keyboard.
Fixing ACS-32 Scale Issues (30 kg, 35 kg) Yourself
Even reliable equipment can occasionally malfunction. Don't worry—some issues with your ACS-32 scales can be resolved on your own. Here are some common situations and how to fix them:
Power indicator is off
Check the following:
- Power cord is not connected.
- Poor plug contact with the outlet.
- Damaged power cord.
- Blown fuse.
Solution: a. Try replacing the power cord. b. Replace the fuse if necessary.
"Lb" appears on the screen with an alarm, then scales turn off
This error usually relates to power issues:
- Low battery charge.
- Prolonged use without recharging.
Solution: a. Charge the battery for 7 hours. b. Check if the power adapter is working properly.
Weight readings are unstable
This could be caused by:
- Low battery or moisture inside the unit.
- Loose connector between the weighing platform and the main unit.
Solution: a. Charge the battery for 7 hours. b. Check and, if needed, replace the connection cable.
"FULL" appears on screen with an alarm
This indicates a connection problem:
- Poor connection between the platform and the main unit.
- Broken cable between the platform and the main unit.
Solution: a. Inspect the cable for damage and ensure secure connections.
Scales show incorrect weight (too high or too low)
This may be due to:
- Loose connection between the platform and the main unit.
- Incorrect calibration.
Solution: a. Check the connection cable and reconnect properly. b. Calibrate the scales (see instructions below).
Calibration Instructions for ACS-32 Scales (35 kg)
If your scales display incorrect weight, follow this simple calibration guide:
- Turn on the scales. "0" should appear on the first display.
- Enter the calibration code: 97.55 (make sure to use the dot).
- Press the TARE button. "--------" will appear on the first display, indicating calibration mode.
- Press the 1 button. Numbers will appear on the middle display.
- By pressing 1, select the number 3015. This means a max weight of 30 kg and 15 kg calibration weight.
- Place a 15 kg standard weight on the platform.
- Press the Reset button.
- Press the TARE button again.
- Turn off the scales.
- Remove the weight from the platform.
- Turn the scales back on to verify calibration success.
Important: Be careful when entering the calibration code and follow the steps precisely.
Useful Links
We hope this information was helpful! If you have any questions, feel free to leave a comment.
No comments:
Post a Comment